ENGINE OIL AND OIL FILTER
Starting
temperature, °C (°F)
Oil viscosities
Table 7
Recommended oil viscosities
Dipstick
"H" mark
"L" mark
Figure 250 Checking oil level
172 / 195
172 / 195
-30
-25
-20
(-22)
(-13)
(-4)
Oil
fillers
Drain plug
MAINTENANCE
47 ENGINE OIL AND OIL
FILTER
47.1 Engine oil specifications
Use oils that meet the Engine Service Classification CF
or CF-4.
-15
-10
-5
(5)
(14)
(23)
S A E 1 0 W - 3 0
S A E 5 W - 2 0
47.2 Oil level check
1.
Check the crankcase oil level with a dipstick with
the engine put horizontal.
2.
If the oil level is at or below "L" (low level) mark on
the dipstick, add oil to "H" (high level) mark on the
dipstick.
NOTE
a.
After adding oil, leave the engine standing for
one minute and check the oil level.
b.
Avoid mixing different brands of oils. In some
cases, they are not compatible with each other
and deteriorate when mixed. Use the same
brand at successive intervals.
c.
If the engine has been left standing for a long
period of time, check the oil for level and
contamination before starting the engine. Start
and run the engine for a few minutes. Then stop
the engine and check the oil level again.
1.
ENGLISH
MAINTENANCE
0
10
20
(32)
(50)
(68)
S A E 3 0
S A E 40
S A E 15 W - 4 0
Service Manual Mitsubishi SL-Series diesel engines
1
30
40
(86)
(104)
Version 08/2004