Multi-Functional Indicator (Onboard Computer) - Skoda 2011 Yeti Owner's Manual

Multi-functional indicator (onboard computer)

Introduction
The multi-functional indicator appears in the display
display  page 22 depending on the equipment fitted to your vehicle.
The multi-functional indicator offers you a range of useful information.
The outside temperature
Driving time
Current fuel consumption
Average fuel consumption
Range
Distance driven
Average speed
Current speed
oil temperature
Warning against excessive speeds
On vehicles which are fitted out with information display, it is possible to switch off
the display of some information.
Caution
Pull out the ignition key while having contact with the display (for example when
cleaning) in order to prevent any damage.
Note

In certain national versions the displays appear in the Imperial system of meas-
ures.

If the display of the second speed is activated in mph, the current speed is not
indicated in km/h on the display.
Using the system Safety
 fig. 18
or in the information
 page 20
 page 20
 page 21
 page 21
 page 21
 page 21
 page 21
 page 21
 page 21
 page 22
Driving Tips
Memory
The multi-functional indicator is equipped with two automatic memories. The
selected memory is displayed in the middle of the display field
The data of the single-trip memory (memory 1) is shown if a 1 appears in the display.
A 2 shown in the display means that data relates to the total distance memory
(memory 2).
Switching over the memory with the help of the button
windscreen wiper lever or with the help of the button
function steering wheel.
Single-trip memory (memory 1)
The single-trip memory collates the driving information from the moment the igni-
tion is switched on until it is switched off. New data will also flow into the calcula-
tion of the current driving information if the trip is continued within 2 hours after
switching off the ignition. If the trip is interrupted for more than 2 hours, the
memory is automatically erased.
Total-trip memory (memory 2)
The total distance driven memory gathers data from any number of individual jour-
neys up to a total of 19 hours and 59 minutes driving or 1 999 kilometres driven.
99 hours and 59 minutes driving time or 9 999 km driven in vehicles with an Infor-
mation display. The memory is deleted when either of these limits is reached and
the calculation starts from anew.
The total-trip memory will not, contrary to the single-trip memory, be deleted after
a period of interruption of driving of 2 hours.
General Maintenance Breakdown assistance
Instruments and warning lights
Fig. 18 Multi-functional indicator
 fig.
18.
A  page 20, fig. 19 on the
B
A on the  page 20 multi-
D
Technical data
19