Skoda 2011 Yeti Owner's Manual page 22

 fig. 19
windshield wiper lever
steering wheel for longer than 1 second.
The maximum distance indicated in both memories is 19 hours and 59 minutes.
99 hours and 59 minutes in vehicles with an Information display. The indicator is set
back to null if this period is exceeded.
Current consumption
The current fuel consumption level is shown in the display in litres/100 km. This
information can help you to adapt your style of driving to the fuel consumption you
wish to achieve.
The display appears in litres/hour if the vehicle is stationary or driving at a low
speed.
The indicated value will be updated every 0.5 seconds while you are driving.
Average fuel consumption
The average fuel consumption since the memory was last erased is shown in the
display in litres/100 km  page 19. This information can help you to adapt your style
of driving to the fuel consumption you wish to achieve.
If you wish to determine the average fuel consumption over a certain period of time
you must set the memory to zero at the start of the measurement using the button
A
on the windshield wiper lever
B
the multifunction steering wheel
for the first 100 m you drive after erasing the memory.
The indicated value will be updated every 5 seconds while you are driving.
Note
The amount of fuel consumed will not be indicated.
Range
The estimated range in kilometres is shown on the display. It indicates the distance
you can still drive with your vehicle based on the present level of fuel in the tank for
the same style of driving.
The readout is shown in steps of 10 km. After lighting up of the indicator light for
the fuel reserve the display is shown in steps of 5 km.
Using the system Safety
A  fig. 19
or the handwheel on the
D
 page 20, fig. 19
or with the handwheel
 page 20, fig. 19 . A zero appears in the display
Driving Tips
multifunction The fuel consumption for the last 50 km is taken as a basis for calculating the range.
If you drive in a more economical manner from this moment on, the range will be
increased accordingly.
If the memory is set to zero (after disconnecting the battery), the fuel consumption
of 10 ltr./100 km is calculated for the range; afterwards the value is adapted accord-
ingly to the style of driving.
Distance driven
The distance driven since the memory was last erased appears in the display
 page 19. If you wish to measure the distance driven of a particular time, you must
set the memory to zero at this moment in time by pressing the button
windshield wiper lever
steering wheel  page 20, fig.
The maximum distance indicated in both memories is 1 999 km or on vehicles with
information display, it is 9 999 km. The indicator is set back to null if this period is
exceeded.
Average speed
The average speed since the memory was last erased is shown in the display in
km/hour  page 19. If you wish to determine the average vehicle speed over a
certain period of time you must set the memory to zero at the start of the measure-
A
on ment using the button
D
the handwheel A
D
A zero appears in the display for the first approx. 300 m you drive after erasing the
memory.
The indicated value will be updated every 5 seconds while you are driving.
Current speed
The current speed which is identical to the display of the speedometer, is indicated
A
on the display
2
oil temperature
If the oil temperature is lower than 50 °C or if a fault in the system for checking the
oil temperature is present, three lines are displayed instead of the oil
temperature.
General Maintenance
Instruments and warning lights
 page 20, fig. 19
or the handwheel
19.
A
on the windshield wiper lever
B
on the multifunction steering wheel
 page 15, fig.
15.
Breakdown assistance
21
A
on the
B
A
on the multifunction
D
 page 20, fig. 19
or with
 page 20, fig. 19 .
Technical data