Identification Details; Fuel Consumption According To The Ece Standards And Eu Guidelines - Skoda 2011 Yeti Owner's Manual

Hide thumbs Also See for 2011 Yeti:
Table of Contents

Advertisement

234
Technical Data
A
Permissible gross weight
1
A
The permissible overall weight of the vehicle/trailer combination when the
2
vehicle is being operated with a trailer
A
Maximum permissible front axle load
3
A
Maximum permissible rear axle load
4
The identification plate is affixed to the lower part of the column between the front
and rear doors on the front passenger side.
WARNING
Do not exceed the permissible overall weight - risk of accident and damage to
the vehicle.

Identification details

Vehicle data sticker
 fig. 203
The vehicle data sticker
ment and is also stated in the Service schedule.
The vehicle data sticker contains the following data:
A
Vehicle identification number (VIN)
1
A
Vehicle type
2
A
Gearbox code, paint number, interior equipment number, engine output,
3
engine code
A
Partial description of the vehicle
4
A
7GG, 7MB, 7MG - vehicles with DPF  page 165
5
Fig. 203 Vehicle data sticker
is located on the floor of the luggage compart-
Vehicle identification number (VIN)
The vehicle identification number - VIN (vehicle body number) is stamped into the
engine compartment on the right hand shock absorber dome. This number is also
located on a sign on the lower left hand edge below the windscreen.
Engine number
The engine number is stamped into the engine block.
Sticker on inside of fuel filler flap
The stickers are affixed to the inside of the fuel filler flap and contain the following
information:
The prescribed types of fuel,
Tyre size,
Tyre pressure.
Fuel consumption according to the ECE standards and
EU guidelines
Depending on the range of the special equipment, style of driving, traffic situation,
weather influences and vehicle condition, the consumption values which in practice
result when using the vehicle can deviate from the indicated values.
Urban traffic
The consumption measurement in urban traffic begins with starting of the cold
engine. Afterwards the normal urban traffic is simulated.
Non-urban traffic
For the consumption measurement in non-urban traffic the vehicle, as in daily
motoring, is accelerated and braked several times in all gears. The vehicle speed
changes within the range from 0 to 120 km/h.
Combined traffic
The consumption value in the combined traffic consists of 37 % from the value for
the urban traffic and of 63 % from the value for the non-urban traffic.
Note
Please note that the information stated in the official vehicle registration docu-
ments always takes priority.

Advertisement

Table of Contents
loading

Table of Contents