Skoda 2011 Yeti Owner's Manual page 21

20 Instruments and warning lights
Note
All information in the memory 1 and 2 is erased if the battery of the vehicle is
disconnected.
Operating with the buttons on the windshield wiper lever and on
the multifunction steering wheel
Fig. 19 Multi-functional indicator: Controls on the windshield wiper lever/controls on the multi-
function steering wheel
 fig. 19
The rocker switch A and the button
A
wiper lever. Switching over and resetting is performed with the handwheel
the multifunction steering wheel.
Selecting the memory
– After briefly pressing the button
A
pressing the button on the multifunction steering wheel, you can select the
D
desired memory.
Selecting the functions with the help of the windshield wiper lever
– Press the top or bottom rocker switch
way, call up in sequence the individual functions of the multi-functional indi-
cator.
Selecting the functions with the help of the multifunction steering
wheel
– By pressing the button A , you can call up the menu of the multi-functional indi-
C
cator.
A are located on the windshield
B
A on the windshield wiper lever or by briefly
B
A for longer than 0.5 seconds. In this
A
– Turn the handwheel
the individual functions of the multi-functional indicator.
Setting function to zero
– Select the memory you want.
– Press the button A
B
The following readouts of the selected memory will be set to zero with the button
A on the windshield wiper lever or with the button
B
steering wheel:

average fuel consumption,

distance driven,

average speed,

Driving time.
You can only operate the multi-functional indicator when the ignition is switched
on. After the ignition is switched on, the function displayed is the one which you last
selected before switching off the ignition.
Outside temperature
The outside temperature appears in the display when the ignition is switched on.
A
on
D
If the outside temperature drops below +4 °C, a snow flake symbol (warning signal
for ice on the road) appears before the temperature indicator and a warning signal
sounds. After pressing the rocker switch
A
or the button at the multifunction steering wheel
C
last is indicated.
WARNING
Do not only rely upon the information given on the outside temperature display
that there is no ice on the road. Please note that black ice may also be present
on the road surface even at temperatures around +4 ? - warning, drive with
care!
Driving time
The driving time which has elapsed since the memory was last erased, appears in
the display. If you wish to measure the driving time as of a particular time, you must
set the memory to zero at this moment in time by pressing the button
A
upwards or downwards. In this way, call up in sequence
D
or A for more than 1 second.
D
A on the multifunction
D
A
at the windshield wiper lever
A
 fig.
19, the function shown
 fig. 19
A
on the
B