Skoda 2011 Yeti Owner's Manual page 111

Hide thumbs Also See for 2011 Yeti:
Table of Contents

Advertisement

110
Starting-off and Driving
Switch on display of the park assist in the information display
Fig. 114 Switching on the park assist/information display: Finding a suitable parking space
Switch on display of the park assist in the information display
Press the button
 fig.
114.
Drive past the parking row up to maximum 30 km/h and with a distance of 0.5 m
to 1.5 m
 fig.
114.
Operate the turn signal for the driver's side if you wish to park on this side of the
road. In the information display the search area for the parking space is indicated on
the driver's side.
If you press the button at a speed greater than 30 km/h and less than 50 km/h, the
message indicating that the speed for detecting the space is exceeded will be
displayed in the information display of the instrument cluster. If the speed drops
below 30 km/h, the condition of the parking assistant is automatically displayed in
the information display of the instrument cluster. When exceeding the speed of 50
km/h, it is required to activate the display again by pressing the button
Note
If the park assist is switched on, a yellow warning light lights up in the button.
The search for suitable parking spaces is automatic after switching on the igni-
tion at speeds of more than 30 km/h. Searching for a parking space is performed at
the same time on the driver and front passenger side.
If the sensors find a suitable parking space, they store its parameters until
another suitable parking space has been found or until a distance of 10 m had been
driven after finding the parking space. This is why it is possible to switch on the park
assist after driving past the parking space, the information on whether this parking
space is suitable for parking appears in the information display.
Parking with the help of the park assist and concluding the parking
procedure
Fig. 115 Information display: the determined parking space with the information to drive on
and for engaging the reverse gear
Fig. 116 Information display: Information for engaging the forward gear
A
D
 fig.
114.
The time limit for the parking procedure with the help of the park assist lasts
180 seconds.
If the park assist has recognised a suitable parking space, it is shown in the
information display
Drive on further until the display
Bring the vehicle to a stop for at least 1 second.
Engage the reverse gear or move the selector lever into the position R.
As soon as the following message is shown in the information display: Steering
interv. active. Monitor area around veh.! , let go of the steering wheel, the
steering will be taken over by the system.
A
B
 fig. 115
A
.
A
 fig. 115
A
appears.
B
A
A
A
or the reverse gear
C

Advertisement

Table of Contents
loading

Table of Contents