Skoda 2011 Yeti Owner's Manual page 95

94 Heating and air conditioning system
Controlling blower
– Turn the blower switch A into one of the positions, 1 to 4, in order to switch the
B
blower on.
– Turn the blower switch A into position 0 in order to switch the blower off.
B
– If you wish to shut off the fresh air supply, use the button
air mode  page 96.
Control for air distribution
– You can adjust the direction of the air flow using the air distribution control
 page 90.
switching cooling on and off
A  fig.
– Press the button
AC
1
– When you again press the switch
warning light in the button goes out.
Rear window heater
– Press button A . Further information  page 57, "Windscreen and rear
 2
window heater".
Auxiliary heating
A
– Press the button in order to directly switch on/off the auxiliary heating
 3
(auxiliary heating and ventilation. Further information  page 99, "Auxiliary
heating (auxiliary heating and ventilation)".
Note

The whole heat output will be needed to unfrost the windscreen and side
windows. No warm air will be fed to the footwell. This can lead to restriction of the
heating comfort.

The warning light AC lights after activation, even if not all of the conditions for
the function of the cooling system have been met. As a result, the readiness for
cooling is signalled when all conditions are satisfied  page 93, "Description of the
air conditioning system".
A - recirculated

4
104. The warning light lights up in the button.
, the cooling system is switched off. The
AC
A
C