Digital Clock; Shift Recommendation For Changing Gears; Multi-Functional Indicator (Onboard Computer) - Skoda Octavia Owner's Manual

18 Instruments and warning lights
On vehicles which are equipped with an information display, you can call up this
display in the menu Settings  page 24.
Caution
We recommend that you do not reset the Service Interval Display yourself other-
wise this can result in the service interval display being incorrectly set, which may
also result in problems with operation of your vehicle.
Note
•
Never reset the display between service intervals otherwise this may result in
incorrect readouts.
•
Information is retained in the Service Interval Display also after the battery of
the vehicle is disconnected.
•
If the instrument cluster is exchanged after a repair, the correct values must be
entered in the counter for the Service Interval Display. This work is carried out by a
specialist garage.
•
The data displayed is the same after resetting the display with flexible service
intervals (QG1) is displayed as that for a vehicle with fixed service intervals (QG2). We
therefore recommend having the Service Interval Display reset only by an author-
ised Škoda Service Partner who is familiar with the procedure for resetting the
display with a vehicle system tester.
•
Please refer to the brochure Service schedule for extensive information about
the service intervals.

Digital clock

You can set the time with the rotary knob
Select the information which you wish to change by turning the button
out the change of the selected information by pressing the button.
On vehicles which are fitted with the information display, it is possible to set the
time in the menu Time  page 24.
WARNING
The clock should not be adjusted while driving for safety reasons but only when
the vehicle is stationary!
A  page 15, fig.
15.
5
A
and carry
5

Shift recommendation for changing gears

An information for the engaged gear
instrument cluster.
In order to minimise the fuel consumption, a recommendation for shifting into
another gear is indicated in the display.
If the control unit recognises that it is appropriate to change the gear, an arrow
is shown in the display. The arrow points up or down, depending on whether it is
recommended to shift into a higher or lower gear.
At the same time, the recommended gear is indicated instead of the currently
A
engaged gear .
A

Multi-functional indicator (onboard computer)

Introduction
The multi-functional indicator appears in the display
information display  page 22 depending on the equipment fitted to your vehicle.
The multi-functional indicator offers you a range of useful information.
The outside temperature
Driving time
Current fuel consumption
Average fuel consumption
Fig. 17 Shift recommendation for
changing gears
A  fig. 17 is shown in the display of the
A
 page 19, fig. 18 or in the
 page 20
 page 20
 page 20
 page 21
A
B