Skoda 2011 Yeti Owner's Manual page 230

Parking light at the front
Fig. 194 Remove cap/removing the fixture for the parking light (halogen headlight)
Removing the light bulb for the parking light (halogen headlight)
– Switch the ignition and all lights off.
– Turn the protective cap in direction of arrow
– Pull out the fixture in direction of arrow
– Take the faulty bulb out of the fixture and insert a new one.
– Insert the protective cap.
Removing the light bulb for the parking light (Xenon headlight)
– Switch the ignition and all lights off.
– Remove the rubber protective cap
– Pull out the fixture in direction of arrow
– Take the faulty bulb out of the fixture and insert a new one.
Using the system Safety
Fig. 195 Removing the fixture for the
parking light (Xenon headlight)
A OPEN and remove it  fig.
1
A  fig. 194.
2
A  page 228, fig. 193.
B
A  fig. 195.
3
Driving Tips
– Insert the protective cap.
Note

In order to facilitate the removal of the fixture with the bulb for the parking light
(halogen headlight), we recommend to remove first of all the connector of the bulb
for the low beam light.

We recommend that you have the headlight setting checked by a Skoda Service
Partner after replacing the light bulb.
Main beam light and low beam light
– Switch the ignition and all lights off.
– Turn the protective cap in direction of arrow OPEN
– Unplug plug A .
A
– Press the wire clamps A
B
194.
tion.
A
– Remove the light bulb
fixing lugs of the light bulb socket fit into the recesses at the reflector.
Installation takes place in the reverse order.
Note
We recommend that you have the headlight setting checked by a Skoda Service
Partner after replacing the light bulb.
General Maintenance
Fuses and light bulbs
Fig. 196 Removing the bulb for the main
beam light and low beam light
 fig. 194
down until they are released from the secured posi-
and insert the new light bulb in such a way that the
C
Breakdown assistance Technical data
229
and remove it.