Required Tools - Toshiba E-STUDIO190F Service Manual

3.2.

Required Tools

No.
1 Soft Cloth
2 Isopropyl Alcohol
3 Phillips Screwdriver (#2)
4 Stubby Phillips Screwdriver (#2)
5 Slotted Screwdriver (3/32 in)
6 Tweezer
3.2.1. Preventive Maintenance Method
No. Part Description
1 Memory Data
2 Auto Document
Feeder (ADF)
3 Scanner Unit
4 Transmitter Unit
5 Inspection Items
6 Gears, Rollers Shafts Check &
7 Timing Belts
Tools
Important
Action
Check 1. Print the RAM DATA for reference and as a precaution.
2. After completing the task(s), print and compare the RAM
1. Clean the Rollers with Wet soft cloth (Water).
Check &
Clean
Check & 1. Clean the Scanning Glass or White Reference Sheet with
Clean
2. Clean it with Wet soft cloth.
Check & 1. Remove any foreign obstacles.
Clean 2. Clean the Rollers with Wet soft cloth (Water).
Check 1. Check the Harnesses.
2. Check the Connectors.
3. Check the Screws. If required, replace consumable parts.
1. Check and grease the required Gears and Shafts.
Grease
Check & 1. Check for belt looseness or abrasion.
Clean 2. Adjust the Idle Pulley.
No.
7 Pliers
8 Cotton Swab
9 Brush
KS-660 - Conductive Grease
10 (Available from Shin-Etsu Silicones of America, Inc.
URL: http://www.shinetsusilicones.com)
Molykote EM-50L Grease
11 (Available from Dow Corning,
URL: http://www.dowcorning.com)
DATA with the previously printed one.
Note:
For stubborn toner accumulation, wipe with a soft cloth
saturated with Isopropyl Alcohol first, then follow up with
a soft cloth saturated with water.
Isopropyl Alcohol when required.
67
Tools
Comments