Toshiba E-STUDIO190F Service Manual page 244

(8) Loosen 5 Screws.
(9) Remove the SC Cover.
(10) Install the Hardware Key into one of the two
available connectors (CN516 or CN517) on the
SC PC Board.
Note:
The connector is keyed, to prevent damage to the
SC PC Board, install the Hardware Key as
illustrated. Do not force the Hardware Key into the
connector if facing the wrong way.
(11) Proceed with the installation of other options.
If finished, reinstall the SD Memory Card if it was
removed, and all Harnesses and Covers.
(12) Plug the AC Power Cord and turn the Power
Switch on the Rear Side of the machine to the
ON position.
(13) Reconnect the Telephone Line Cable if it was
disconnected.
(14) Install the Internet Fax/Email Software into the
PC with the Operator's Manual by following the
prompts of the Installation Wizard.
244