Table of Contents
Advertisement
2.2.1.5.
Paper Transfer Motor (324), Paper Feed Motor (507)
(1) Remove the Left Cover, Upper Left Cover and
SDR Cover. (Refer to 2.2.1.4.)
(2) Disconnect the Harnesses on the SDR PC
Board (CN701, CN706, CN707, CN709 and
CN714).
(3) Release the Harnesses from the Harness
Clamps.
(4) Remove 1 Silver Screw (S6).
(5) Slightly lift the Control Panel Unit.
(6) Disconnect the Harness on the PNL1 PC Board
(CN230).
37
Advertisement
Table of Contents
Troubleshooting
