Toshiba E-STUDIO190F Service Manual page 137

4.10.3. Error Message Appears on the PC
Error Message
Network Print DLL Error.
Network Port is Busy.
Cannot print because an error is
found in the current printer
setting.
4.10.4. Error Message Appears on the Unit
Error Message
Cannot complete print job
Image memory overflow
Cannot complete
Confirm print condition
Cannot print
System error
4.10.5. System Error (CD Drive Related Error During Installation)
Problem
Cannot read the drive.
• Check if the Toshiba Device is turned "On", and the 10Base-T /
100Base-TX cable is properly connected.
• Printer Properties may be incorrectly configured. (i.e. Printer Port)
• The Toshiba Device may be processing someonefs print job,
please wait, and try again later.
• The Toshiba Device is either Transmitting or Receiving an email.
• Verify and specify the paper size or orientation to coincide with the
application and the printer driver settings.
• The available Sort Memory in the Toshiba Device may not be
enough to complete the print job.
Either install an optional Sort Memory or change the
resolution to 300 dpi in the Printer Driver Properties dialog box.
• The print settings may not be matched for the system.
Change the printing settings in the Printer Driver Properties
dialog box.
i.e. Multi-sized printing.
• Change the resolution to 300 dpi in the Printer Driver properties
dialog box.
• Insert the CD into the drive and click "Retry".
137
Possible Solution(s)
Possible Solution(s)
Possible Solution(s)