Toshiba E-STUDIO190F Service Manual page 169

5.2.4.5. Protocol Trace
Print a Protocol Trace Report for the previous communication.
Press the "V", "/\" arrow keys to select the "3: Print Report/List" on the display.
↓
Press the "SET" key to select the "1: Function Parameter List".
↓
Press the "V", "/\" arrow keys select the "6: Protocol Trace".
↓
Press the "SET" key.
↓
Press the "V", "/\" arrow keys select the "1: L-1".
↓
Press the "SET" key.
↓
Press the "STOP" key twice to exit the service mode.
*************** PROTOCOL LOG. REPORT ****************** DATE MMM-dd-yyyy ***** TIME 16:56 *******
STATUS : OK
MODE : ECM-TX
SPEED : 9600bps
REMOTE CAPA. : DIS 00 CE B9 C4 80 12
LOCAL CAPA. : TSI 2B 20 20 20 38 37 2B 2B 2B 2B
DCS 00 C6 F8 44
COMMAND LOG.
REMOTE : NSF
LOCAL :
------------------------------------------------------------------
REMOTE : MCF
LOCAL :
****************************-TOSHIBA
(STANDARD)
0MS/L
39 38 36 36 35 34 37 38 38 30
CSI DIS CFR
TSI DCS
DCN
-TOSHIBA
-*************-12345678901234567890-***************
169
PIX PPS-EOP
-