Toshiba E-STUDIO190F Service Manual page 114

When the packet does not reach the specified destination even when the physical connection is
properly made, check the registered persistent routes on the same subnet as the Unit by typing "route
print" in the DOS command-line. The output display is shown below:
C:\WINDOWS>route print
Active Routes:
Network Address
0.0.0.0
127.0.0.0
192.168.3.0
192.168.3.2
192.168.3.255
224.0.0.0
255.255.255.255
6. Host Name Query on DNS Server
Windows XP/2000/NT 4.0 also has a tool that enables you to test DNS to verify that it is working
properly. This utility is not available on Windows 98/Me.
From the DOS command-line, type "NSLOOKUP" to display the following output:
C:\>nslookup
Default Server: sv1.labo.pcc.com
Address: 192.168.1.1
NS(Name Server) Record in Domain
From the DOS command-line, type "Is -t NS <Domain Name>" to display the following output:
> ls -t NS labo.pcc.com.
[sv1.labo.pcc.com.]
labo.pcc.com. NS server = sv1.labo.pcc.com
MX(Mail Exchange) Record in Domain
From the DOS command-line, type "Is -t MX <Domain Name>" to display the following output:
> ls -t MX labo.pcc.com
[sv1.labo.pcc.com]
labo.pcc.com.
A (Address) Record in Domain
From the DOS command-line, type "Is -t A <Domain Name>" to display the following output:
> ls -t A labo.pcc.com
[sv1.labo.pcc.com]
labo.pcc.com. NS server = sv1.labo.pcc.com
sv1
A
sv2 A
ec5 A
ec4 A
ef1 A
(To leave from this menu, type "exit" on the command-line.)
Netmask Gateway Address
0.0.0.0 192.168.3.254
255.0.0.0 127.0.0.1
255.255.255.0 192.168.3.2
255.255.255.255 127.0.0.1
255.255.255.255 192.168.3.2
224.0.0.0 192.168.3.2
255.255.255.255 192.168.3.2
MX 10 sv2.labo.pcc.com
192.168.1.1
192.168.1.2
192.168.1.4
192.168.3.4
192.168.3.5
Interface
192.168.3.2
127.0.0.1
192.168.3.2
127.0.0.1
192.168.3.2
192.168.3.2
192.168.3.2
114
Metric
1
1
1
1
1
1
1