Table of Contents
Advertisement
2.2.2.
Control Panel Unit
2.2.2.1.
Battery (122), PNL1 PC Board (2102), PNL2 PC Board (2105), PNL3 PC Board
(2104), PNL4 PC Board (2106), LCD Module (123)
<Replace the Battery>
(1) Remove 1 Screw (X8).
(2) Remove the Battery Holder (110).
(3) Replace the Battery (122).
(4) Reinstall the Battery Holder and the Screw.
Note:
Dispose of used Batteries according to the
instructions of your Local Solid Waste Officials and
Local Regulations.
(5) Remove 1 Silver Screw (S6).
(6) Remove 1 Silver Screw (S6).
(7) Slightly lift the Control Panel Unit.
41
Advertisement
Table of Contents
Troubleshooting
