Table of Contents
Advertisement
(6) Proceed with the installation of other options.
If finished, reinstall all Harnesses and Covers.
(7) Install the Bracket L and Bracket R as
illustrated.
(8) Secure the 2 Brackets with 7 Silver Screws.
(9) Connect the Harness of the 2nd Paper Feed
Module to the machine.
Note:
Make sure the Connector is inserted securely as
illustrated.
(10) Reinstall the 2nd Paper Tray.
(11) Reinstall the Rear Paper Tray Cover.
(12) Plug the AC Power Cord and turn the Power
Switch on the Rear Side of the machine to the
ON position.
(13) Reconnect the Telephone Line Cable if it was
disconnected.
(14) Load paper into the 2nd Paper Tray.
Caution:
Make sure that the paper is set under the Ribs and
that it does not exceed the Max. Level Indicator.
You can load up to 550 sheets (20 lb / 75 g/m
250
2
).
Advertisement
Table of Contents
Troubleshooting
