Table of Contents
Advertisement
Phone Line connection, network connection, integrated
into the door intercom system with NX-181xx Voice
keypads
•
All of the above features plus:
•
NX-181xx Voice keypads can be configured to answer a call initiated from
either of the two door stations, they can also control the NX-595Es onboard
door release relays.
•
Remote listen in / two way communication – this feature allows users to
connect to any or all of the connected NX-181xx Voice keypads from a
remote location an "listen-in" to any audio within that room / rooms.
Accessing the NX-595E via a Touch Tone
Phone
This section describes how to access the NX-595E via an off site touch-tone
phone. The NX-595E must be on an independent line to the touch-tone phone
from which you are trying to connect. The NX-595E must be pre-programmed by
your security service provider to automatically answer the incoming call once the
predetermined number of calls / rings have been reached. When the desired
number of calls / rings has been reached the NX-595E will grab the phone line
and announce the following.
Enter your code for system access, press star to cancel
Enter your user / master code (default master code is 1234), the NX-595E will
announce the recorded system name (if recorded) and list all accessible main
menus, you can now make your selection as required.
You are now connected to (system name)......
Press 1 for system status
Press 2 for system control
Press 3 for intercom control
Press 4 for output control
Press 5 for message bank
Press 0 for system configuration *
Press # to exit and disconnect the session
* Denotes master code access only
The above sequence will be shown throughout this manual as
If answering machine defeat is enabled, accessing the NX-595E remotely is
accomplished by calling the phone number the NX-595E is connected to and
allowing it to ring once or twice, then hanging up, waiting 10 seconds, then
calling back the NX-595E, which will now answer the next incoming call. The
second call must be made within 60 seconds of the first call.
NX-595E User Manual
[PIN].
13
Advertisement
Table of Contents
