The stack feed-out belt feeds the stack out to the shift roller.
The pawl on the belt lifts the stack.
The shift roller continues to feed the stack out.
The shift roller does not move from side to side in stapling mode.
The exit motor turns the shift roller.
The stack-feed out motor must move the belt to home position. But, this does not
occur until the stack is fully fed out to the lower tray.
Stack Feed-out
Stack feed-out
motor: Feeds the
stapled stack out
Stack
of the jogger tray
Feed-
Stack feed out belt
out
Motor
HP sensor:
Detects when the
belt is at home
position
HP
Sensor
262
262