Ricoh B230 Training Program page 135

Toner Bottle Detection/Full Detection
Waste Toner
Sensor
A projection on the bottle activates the bottle set switch (at the
rear of the machine).
When the waste toner sensor detects the actuator, a 'near-full'
condition occurs.
The machine can make 500 more copies. Then the 'full' condition
occurs and the machine stops.
The bottle set switch mechanism is not shown. It is at the rear of the machine (same
as the waste toner sensor).
Show the projection on the bottle to the class. Also, go to the machine and show
them the sensor, inside the machine at the rear.
135
135