Standard
Paper Exit
This drawing shows the G071 printer.
For the B156, the finisher is attached to the left side of the copier, and paper goes
in at the right side of the finisher.
The main point of this diagram is to show the jogger tray, and the mechanism is
the same.
The dotted line shows the path to the jogger tray.
The jogger tray shifts alternate sets to one side, if shift sorting is selected.
The jogger tray is also used in stapler mode (the stapler is attached to this
tray).
Paper Path to the Jogger
Interchange Unit
Finisher
Stapler
Duplex Unit
245
245