Advertisement
Level the headlight beam according to the
load condition of your vehicle by turning this
switch. The chart below shows the appropri-
ate switch position for different vehicle-load
conditions.
Switch Position
Vehicle Load
D13A
Condition
Engine
Driver only
0
Driver +
1 passenger
0
(in front seat)
Driver +
4 passengers,
1
no cargo
Driver +
4 passengers,
2
cargo added
Driver +
3
full cargo
80JM040
D16AA
Engine
0
0
1
2
3
With the ignition switch in the "ON" position
or the ignition mode ON, move the lever up
or down to activate the right or left turn sig-
nals.
65D611
Move the lever all the way upward or
downward to signal. When the turn is com-
pleted, the signal will cancel and the lever
will return to its normal position.
Move the lever part-way in the direction to
turn and hold it there.
60MK013
60MK014
Advertisement
