Advertisement
The remote controller enables the follow-
ing operations:
• You can lock or unlock the doors by
operating the LOCK/UNLOCK buttons
on the remote controller. Refer to the
explanation in this section.
• You can lock or unlock the doors by
pushing the request switch. For details,
refer to the explanation in this section.
• You can start the engine without using
an ignition key. For details, refer to
"Engine Switch" in the
section.
(2)
(1) Lock button
(2) Unlock button
You can lock or unlock all doors (including
the tailgate) simultaneously by operating
the remote controller near the vehicle.
• To lock all doors, push the "LOCK" but-
ton (1) once.
• To unlock only the driver's door, push the
"UNLOCK" button (2) once.
• To
unlock
"UNLOCK" button (2) once again.
NOTE:
You can switch the function that unlocks all
doors from twice operations to once opera-
tion, and vice versa, via the setting mode
of the information display. For details on
how to use the information display, refer to
"Information Display" in this section.
The turn signal lights will flash once and
the siren will sound once when the doors
are locked.
When the doors are unlocked:
• The turn signal lights will flash twice and
the siren will sound twice.
(1)
• If the interior light switch is in the
"DOOR" position, the interior light will
turn on for about 15 seconds and then
fade out. If you press the engine switch
during this time, the light will start to fade
out immediately.
Be sure the doors are locked after you
operate the "LOCK" button (1).
68LM206
If no door is opened within about 30 sec-
onds after the "UNLOCK" button (2) is
operated, the doors will automatically lock
again.
other
doors,
push
the
Advertisement
