Advertisement
2) Without depressing the clutch pedal,
press the engine switch (1).
(1)
Every time you press the engine switch,
the ignition mode changes as follows.
LOCK
ACC
(Audio equipment)
(OFF)
NOTE:
When selecting the ignition modes, the
information display in the instrument clus-
ter shows certain messages. Refer to
"Information Display" in the "BEFORE
DRIVING" section for details.
Your keyless push start system remote con-
troller may not be sensed as being within the
"interior workable area" (refer to the related
explanation in this section). Try again after
making sure you have the remote controller
with you. If the ignition modes still cannot be
selected, the battery of the remote controller
may be discharged. To be able to select an
ignition mode, you must then use the follow-
ing method:
82K254
ON
(2)
57L31033
1) Without depressing the brake pedal
and the clutch pedal, push the engine
switch (1).
2) Within about 10 seconds during which
the master warning indicator light in the
instrument cluster is blinking and the
"PLACE
KEY
SWITCH" message appears on the
information display, touch the engine
NOTE:
• If you still cannot select the ignition
• The immobilizer/keyless push start sys-
(1)
• You may customize the system to cause
• If the battery of the remote controller is
58MST0302
FOB
ON
START
switch with the lock button end of the
remote controller (2) for about 2 sec-
onds.
modes, there may be some problem with
the keyless push start system. Contact
an
for an inspection of the system.
tem warning light will come on for about
5 seconds while the master warning indi-
cator light is blinking. In addition, the
information display in the instrument
cluster will show a message during this
time. Refer to "Information Display" in
the "BEFORE DRIVING" section for
details.
the interior buzzer to sound once for the
remote controller out of sensing range
warning. To incorporate this customiza-
tion, please contact an
about to become completely discharged,
the corresponding message will appear
on the information display when you
press the engine switch to change the
ignition mode to ON. Refer to "Informa-
tion Display" in the "BEFORE DRIVING"
section for details. For details on replac-
ing the battery, refer to the "Keyless
Push Start System Remote Controller" in
the "BEFORE DRIVING" section.
Advertisement
