Advertisement
(1)
(2)
To remove the battery:
1) Disconnect the negative cable (1).
2) Disconnect the positive cable (2).
3) Remove the bracket bolt (3) and
remove the bracket (4).
4) Remove the battery.
To install the battery:
1) Install the battery in the reverse order of
removal.
(4)
(3)
NOTE:
When putting the battery in the battery tray,
51KM039
make sure the recess on the terminal side
bottom of the battery engages with the
convex portion of the tray.
2) Tighten the bracket bolt and battery
cables securely.
NOTE:
When the battery is disconnected, some of
the vehicle's function will be initialized and/
or deactivated.
These function are required to reset after
the battery is reconnected.
Your vehicle has three types of fuses, as
described below:
The main fuse takes current directly from
the battery.
These fuses are between the main fuse
and individual fuses, and are for electrical
load groups.
64MS176
These fuses are for individual electrical cir-
cuits.
To remove a fuse, use the fuse puller (1)
provided in the fuse cover.
(1)
64MS198
Advertisement
