Advertisement
Right angle
To lengthen, release the latch plate from the
buckle, pull the latch plate (adjuster) in the
direction of the arrow, at right angles to the
belt. The latch plate should then be refitted
into the buckle and the belt tightened as
previously described.
To unfasten the belt, press the release but-
ton on the buckle catch.
NOTE:
To identify the center seat belt buckle and
latch plate in the rear seat, "CENTER" is
marked on the buckle and latch plate of the
center lap belt. The buckles are designed so
a latch plate cannot be inserted into the
wrong buckle.
80JS029
(1) Driver's seat belt reminder light
When the driver doesn't buckle his or her
seat belt, with the ignition switch in the
"ON" position or the ignition mode "ON" the
driver's seat belt reminder light in the
instrument cluster will blink and a buzzer
will sound as a
buckle his or her sear belt. For more details,
refer to the explanation below:
If
the
driver's
unbuckled when the ignition switch is in the
"ON" position or the ignition
80JS031
"ON", the reminder works as follows:
1.
2. After the vehicle's speed has reached
about
reminder light will blink and a buzzer will
sound for about 95 seconds.
(1)
buckled.
64MS045
reminder to the driver to
seat
belt
remains
mode is
The driver's seat belt reminder light will
come on.
15
km/h,
the
driver's seat belt
has finished, the reminder
on until the driver's seat belt is
Advertisement
