Advertisement
Pull the lever up and slide the seat.
Pull the lever up and move the seatback.
Pull the lever up to raise the seat. Push the
lever down to lower the seat.
After adjustment, try to move the seat and
seatback forward and rearward to ensure
that it is securely latched.
Head restraints are designed to help
reduce the risk of neck injuries in the case
of an accident. Adjust the head restraint to
the position which places the center of the
head restraint closest to the top of your
ears. If this is not possible for very tall pas-
sengers, adjust the head restraint as high
as possible.
NOTE:
It may be necessary to recline the seat-
back to provide enough overhead clear-
ance to remove the head restraint.
80J001
To raise the front head restraint, pull
upward on the restraint until it clicks. To
lower the restraint, push down on the
restraint while holding in the lock lever. If a
head restraint must be removed (for clean-
ing, replacement, etc.), push in the lock
lever and pull the head restraint all the way
out.
64MS163
Advertisement
