Advertisement
(1) Retainer
4) If the new blade is provided without the
two metal retainers, move them from
the old blade to the new one.
(3)
(3)
(A) Up
54G135
(B) Down
NOTE:
When you install the metal retainers (3),
make sure the direction of metal retainers
as shown in the above illustrations.
5) Install the new blade in the reverse order
of removal, with the locked end posi-
tioned toward the wiper arm.
Make sure the blade is properly retained
by all the hooks. Lock the blade end into
place.
6) Reinstall wiper frame to arm, making
sure that the lock lever is snapped
securely into the arm.
(3)
60MH071
(A)
(B)
60MH072
1) Hold the wiper arm away from the win-
dow.
2) Remove the wiper frame from the arm
as shown.
3) Slide the blade out as shown.
80G146
Advertisement
