Suzuki Nexa S-CROSS series 2015 Owner's Manual & Service Booklet page 142

3) While holding the hood, pull the prop
rod out from the holding clip, then insert
the end of the rod into the designated
hole in the hood.
To close the engine hood:
1) Lift the hood up slightly and remove the
prop rod from the hole. Put the prop rod
back to the holding clip.
64MS127
2) Lower the hood to about 20 cm above
the hood latch, then let it drop down.
Make sure the hood is securely latched
after closing.
NOTICE
64MS128