Advertisement
When the ignition switch is in the "ON" posi-
tion or the ignition mode is ON, you can use
the
wiper/washer
lever
equipped).
To turn the windshield wipers on, move the
lever down to one of the three operating
positions. In the "INT" position, the wipers
operate intermittently. The "INT" position is
very convenient for driving in mist or light
rain. In the "LO" position, the wipers operate
at a steady low speed. In the "HI" position,
the wipers operate at a steady high speed.
To turn off the wipers, move the lever back
to the "OFF" position.
Move the lever up and hold it to the "MIST"
position, the windshield wipers will turn on
continuously at low speed.
or
switch
(if
If the lever is equipped with the "INT TIME"
control, turn the control forward or rear-
ward to adjust the intermittent wiper opera-
tion to the desired interval.
64MS063
MIST
OFF
AUTO
64MS064
LO
HI
Press the engine switch to change the igni-
tion mode to ON. To turn the rain-sensing
wipers on, move the lever down to one of
the three operating positions. In the "AUTO"
position (if provided), the wipers automati-
cally operate when the wiper system senses
rain or snow. In the "LO" position, the wipers
operate at a steady low speed. In the "HI"
position, the wipers operate at a steady high
speed. To turn off the wipers, move the lever
back to the "OFF" position.
Move the lever up and hold it to the "MIST"
position; the wipers will operate continu-
ously at low speed for as long as you hold
the lever in the "MIST" position.
64MS065
Advertisement
