Advertisement
NOTE:
When reinstalling the light housing, make
sure the clips are properly attached.
(2)
61MM0B085
1) Open the tailgate. Remove the clips (1)
by prying it off with a flat blade screw-
driver as shown in the illustration. Then,
pull out the trim (2).
(3)
2) Disconnect the coupler (3) by pushing
the lock release. Turn the bulb holder of
(1)
61MM0B088
(5) Removal
(6) Install
3) To remove and install the bulb of the
(4)
61MM0B089
the reversing light (4) counterclockwise
and remove it.
(4)
(5)
(6)
reversing light (4), simply pull out or
push in the bulb.
61MM0B090
Advertisement
