Advertisement
NOTE:
With disc brakes, the fluid level can be
expected to gradually fall as the brake pads
wear.
Check if the brake pedal stops at the regular
height without spongy feeling when you
depress it. If not, have the brake system
inspected by your
. If you doubt the brake pedal for
the regular height, check it as follows:
With the engine running, measure the dis-
tance between the brake pedal and floor
carpet when the pedal is depressed with
approximately 30 kg (66 lbs) of force. The
minimum distance required is as specified.
Since your vehicle's brake system is self-
adjusting, there is no need for pedal adjust-
ment.
If the pedal to floor carpet distance as mea-
sured above is less than the minimum dis-
tance required, have your vehicle inspected
by your
NOTE:
When measuring the distance between the
brake pedal and floor wall, be sure not to
include the floor mat or rubber on the floor
wall in your measurement.
54G108
.
Advertisement
