Advertisement
1) Place the vehicle on level, hard ground.
2) Set the parking brake firmly and shift
into "R" (Reverse).
3) Turn on the hazard warning flasher if
your vehicle is near traffic.
4) Block the front and rear of the wheel
diagonally opposite of the wheel being
lifted.
5) Place the spare wheel near the wheel
being lifted as shown in the illustration
in case that the jack slips.
75F062
6) Position the jack at an angle as shown
in the illustration and raise the jack by
54G253
turning the jack handle clockwise until
the jack-head groove fits around the
jacking bar beneath the vehicle body.
7) Continue to raise the jack slowly and
smoothly until the tire clears the
ground. Do not raise the vehicle more
than necessary.
63J100
63J101
Advertisement
