Advertisement
If the transmitter becomes unreliable,
replace the battery.
NOTICE
To replace the battery of the transmitter:
(1)
1) Remove the screw (1), and open the
transmitter cover.
2) Remove the transmitter (2).
(2)
(4) Lithium disc type battery:
CR1620 or equivalent
3) Put the edge of a flat blade screwdriver
in the slot of the transmitter (2) and pry
(2)
it open.
4) Hold the cover around the electric com-
ponent (3), insert a precision screw-
driver covered with insulating tape in
the space between the cover and the
component, and then remove the com-
ponent.
5) Replace the battery (4) so its + terminal
faces the " " mark of the transmitter.
Insert the battery all the way into the
68LM248
holder.
6) Close the transmitter and install it into
the transmitter holder.
7) Close the transmitter cover, install and
tighten the screw (1).
8) Make sure the door locks can be oper-
ated with the transmitter.
9) Dispose of the used battery properly
(3)
(4)
64MS197
NOTE:
Used batteries must be disposed properly
according to applicable rules or regulations
and must not be disposed with ordinary
household trash.
according to applicable rules or regula-
tions. Do not dispose of lithium batter-
ies with ordinary household trash.
NOTICE
Advertisement
