Advertisement
To use the hands-free function with this
unit, it is required to register the phone
in advance.
NOTE:
• Up to 5 phones can be registered.
• To set up a new phone, disconnect the
audio player from the unit. Connect the
audio player again after phone setup is
completed if necessary.
• When failed to establish the pairing
within 120 seconds, the connecting
operation will be canceled. Please try
again or refer to the manual of the phone
in use for how to establish the pairing
with the phone.
®
1) Press the Bluetooth
setup button (4).
®
The Bluetooth
setup menu will be dis-
played.
2) Turn the TUNE FOLDER PUSH SOUND
knob (1) to select "Setup Bluetooth", and
press the knob (1) to determine the
selection.
3) Turn the TUNE FOLDER PUSH SOUND
knob (1) to select "Pairing", and press
the knob (1) to determine the selection.
4) Select "CAR AUDIO" from the Blue-
®
tooth
menu of the phone and establish
the pairing.
Refer to the manual of the phone in use
for further information.
5) Enter the Passkey displayed on the unit
to the phone. (For phones with Blue-
®
tooth
version 2.1 or above passkey
input is not required.)
6) Press the On Hook button (6).
NOTE:
• When selecting "Go Back", the previous
menu will be displayed.
• When additionally registering a phone,
operate the same step from 1).
Press the Off Hook button (5) to receive a
call.
Press the On Hook button (6) to end a call.
Press the On Hook button (6) to reject a
incoming call.
• Turn the VOL PUSH POWER knob (2)
during a call.
Turning it clockwise increases the vol-
ume;
turning
it
counterclockwise
decreases the volume.
• Press the VOL switch (7) during a call.
Pressing "+" of the switch increases the
volume, pressing "-" of the switch
decreases the volume.
• Turn the VOL PUSH POWER knob (2)
while a call coming in.
Turning it clockwise increases the vol-
ume;
turning
it
counterclockwise
decreases the volume.
• Press the VOL switch (7) during a call.
Pressing "+" of the switch increases the
volume, pressing "-" of the switch
decreases the volume.
Follow the instructions below to adjust the
call or ringtone volume.
®
1) Press the Bluetooth
setup button (4).
®
The Bluetooth
setup menu will be dis-
played.
2) Turn
the
TUNE
FOLDER
SOUND knob (1) to select "Setup Tele-
phone", and press the knob (1) to deter-
mine the selection.
3) Turn
the
TUNE
FOLDER
SOUND knob (1) to select "Sound Set-
ting", and press the knob (1) to deter-
mine the selection.
PUSH
PUSH
Advertisement
