Advertisement
The information display is shown when the
ignition switch is in the "ON" position or the
ignition mode is ON.
(A)
(B)
(C)
(D)
(E)
(1)
(1) Information display
(3)
(2) Indicator selector knob
(3) Trip meter selector knob
The information display shows the follow-
ing information.
Clock
Thermometer
Warning and indicator messages /
Fuel consumption / Driving range /
Average speed
Trip meter
Odometer
64MS183
(2)
When the ignition switch is turned to the
"ON" position or the engine switch is
pressed to change the ignition mode to
ON, the message shown in the above illus-
tration will appear on the display for sev-
64MS184
eral seconds.
Some warning and indicator messages
may appear on the display when the igni-
tion switch is in the "ACC" or "LOCK" posi-
tion, or the ignition mode is ACC or LOCK
(OFF).
The display (A) shows the time.
To set the clock, follow the "Setting mode"
instructions in this section.
The display (B) shows the thermometer.
The thermometer indicates the outside
temperature.
If the outside temperature nears freezing,
the message shown in the above illustra-
tion will appear on the display.
64MS181
NOTE:
The outside temperature indication is not
the actual outside temperature when driv-
ing at low speed, or when stopped.
61MM0A160
Advertisement
