EHN Plus Series
7.7.5 Schedule
Use this page to configure a schedule for periods during which the camera should deactivate all
user-activated Events (gray Deselect periods), or when the camera should deactivate all
user-activated Events, except Schedule Recording (SR) events (blue Schedule Recording-only
periods), or when the camera should deactivate only SR events (red Event Recording-only periods),
or when it should enable all activated Events (yellow periods).
Event Recording: Click this button to make every hour block you click on red. A red block
represents an Event Recording-only block, which represents an hour when the camera will
deactivate all preconfigured, activated Schedule Recording events and keep all the other activated
events active.
Schedule Recording: Click this button to make every hour block you click on blue. A blue block
represents a Schedule Recording-only block, which represents an hour when the camera will
deactivate all other preconfigured, activated events and keep only the preconfigured, activated
Schedule Recording events active.
Event + Schedule: Click this button to make every hour block you click on yellow. A yellow block
represents an hour in which all activated events, including Schedule Recording events, will be
active.
Deselect: Click this button to make every hour block become grey. A grey block represents an hour
in which all activated events, including Schedule Recording events, will be inactive.
Click Apply to save all settings, or click Reset to cancel.
61