Accessing The User Interface; Assigning An Ip Address - EverFocus EHN3160 Plus User Manual

5. Accessing the User Interface

This section explains how to access the Web interface of the camera for configuration.
5.1

Assigning an IP Address

You have to assign an IP address for your camera to be accessible. To assign an IP address to the
camera, use the IP Utility (IPU) software included in the software CD. Please connect the IP camera in
the same LAN of your computer.
1. Install and then start the IPU program
2. Click Find Devices to search the cameras connected in the LAN. The default network values of
the cameras will be displayed. By default, the network protocol of the camera is DHCP.
3. To configure the network settings, select a camera and then click Login/Multi Login to log in.
4. Type the user ID and password. Click OK.
Note:
1. The default user ID is user1 and the default password is 11111111.
2. If you select more than one camera that has the same user ID / password, you will be able
to log in several cameras at once.
. The following dialog box appears.
13
EHN Plus Series