6.
Insert the network / PoE cable or the additional cables through the Cable Gland. Up to three
cables can be inserted. Note that except the network / PoE cable, additional wires have to be
bundled into a cable with diameter ranging from 5.3mm to 6.4mm (see Step d below).
a.
Remove the black Adjustment Ring if you are using a Cat 5 network cable. Note that the four
Adjustment Rings, including one black and three transparent rings, are attached on the
Cable Gland. If you are using a Cat 6 network cable, you can ignore this step. For details on
the Adjustment Rings, please refer to 10.1 Adjustment Rings.
Transparent x 3 (1 mm thickness)
b.
Remove the Plug(s) from the Stopper (depends on the number of cables inserted). One
Cable Conduit can only be inserted with one cable.
c.
Insert the network / PoE cable through the Cable Conduit, if your network / PoE cable
already has a RJ‐45 connector, then you can use the Slitted Cable Conduit.
Black x 1 (0.5 mm thickness)
9
EHN Plus Series