Alarm Settings
Input Triggering Type: Select from Normal Close and Normal Open. (Default:
Normal Open)
Output Triggering Type: Select from Normal Close and Normal Open. (Default:
Normal Open)
Press Apply to apply the setting changes or Reset to reset without saving the
change.
5.7.4 Schedule
The event will start at the specified schedule. After selecting a time zone, the block
will show the time zone settings.
How to set a schedule:
Select the edit actions of "Event Recording", "Schedule Recording",
"Event+Schedule" or "deselect". The first 3 actions are distinguished by 3
different colors.
There are 24 blocks (one block = 1hr) on the time bar representing 24 hours
respectively. Set a schedule start time by clicking on a desired start time block on a
time bar. The selected blocks will turn the representing color, which means this
40
EHN3200