Network - EverFocus EHN3160 Plus User Manual

7.3

Network

This page covers network-related settings, including Network, DDNS, SMTP/FTP, HTTPS, SNMP, and
Network Alarm.
7.3.1 Network
The following information is required to configure the network settings. Contact your network
administrator or your internet service provider to get the info.
【IP Settings】
IP Type: Refer to the network administrator for these settings of the server. Default: DHCP
DHCP: This setting lets the system use an automatically assigned (dynamic) IP address. This

address can change under certain circumstances. For instance, when the camera's network
switch/hub has to be rebooted. Do not assign to the DHCP server the same IP addresses used
for the other network cameras and PCs with unique IP addresses.
Static IP: The user can manually set the Static IP address. This type of address is stable and

cannot change, but the user has to make sure there are no address conflicts with other
network-connected devices.
PPPoE: This is a DSL-connection application. The ISP will ask the user to input a username and

password. Contact your ISP for these details.
30
EHN Plus Series