EverFocus EHN3160 Plus User Manual page 55

EHN Plus Series
IR Smart Settings: Select ON and set up the level to enhance the image quality when the images
are over exposure. This function is useful when the camera is in the Night mode. This function is
only available for EHN3260 Plus.
Saturation: Set the saturation value. This function is only available for EHN3160 Plus.
Mirror: Switch Mirror ON to rotate the image horizontally around a vertical axis.
Flip: Switch Flip ON to rotate the image vertically around a horizontal axis.
Negative: Switch this setting ON to view a color negative version of the video image. This is useful
at night or when viewing temperature‐sensitive images.
Sharpness Settings: Select the sharpness level of the image. A low sharpness level will deliver a
softer, less detailed image. A high level will deliver a sharp, highly detailed image. Switch
Resolution Enhancement ON to enable the resolution enhancement function.
(Auto) Contrast: Select the contrast level of the image.
Suppress Function: This function is only available for EHN3340 Plus.
Aperture Compensation Suppression: (OFF/Low/Middle/High) This setting can be activated to
suppress luminance noise when the AGC level increases.
Chroma Suppression: (OFF/Low/Middle/High) This setting can be activated to suppress
chrominance noise when the AGC level increases.
Ygamma: (gamma 2.2/standard/contrast enhance/high light range mode L/High light range mode
H). Select the Ygamma value for the video quality of the monitor. This function is only available for
EHN3340 Plus.
Monitor Settings: For EHN3160 Plus, select a gamma value from Set 1, Set 2 or Set 3. For EHN3260
Plus, user can use this field to optimize video quality for his or her specific type of monitor – LCD
or CRT.
Color Space Standard: The options are YUV601 for SD and YUV709 for HD. These define the color
space standard required to convert an RGB picture to a YUV picture. Generally, YUV601 is used for
Standard Definition (720P) devices and the YUV709 is used for High Definition (1080P) devices.
Click Apply to save all changes. Click Reset to cancel all changes.
48