Schedule - EverFocus EPN4122 User Manual

7.8.5

Schedule

Use this page to configure a schedule for periods during which the camera should deactivate all
user-activated Events (gray Deselect periods), or when the camera should deactivate all user-activated
Events, except Schedule Recording (SR) events (blue Schedule Recording-only periods), or when the
camera should deactivate only SR events (red Event Recording-only periods), or when it should enable
all activated Events (yellow periods).
Event Recording: Click this button to make every hour block you click on red. A red block
represents an Event Recording-only block, which represents an hour when the camera will
deactivate all preconfigured, activated Schedule Recording events and keep all the other activated
events active.
Schedule Recording: Click this button to make every hour block you click on blue. A blue block
represents a Schedule Recording-only block, which represents an hour when the camera will
deactivate all other preconfigured, activated events and keep only the preconfigured, activated
Schedule Recording events active.
Event + Schedule: Click this button to make every hour block you click on yellow. A yellow block
represents an hour in which all activated events, including Schedule Recording events, will be
active.
Deselect: Click this button to make every hour block become grey. A grey block represents an hour
in which all activated events, including Schedule Recording events, will be inactive.
Click Apply to save all settings, or click Reset to cancel.
81
EPN Series