Sony MVS-8000X System User Manual page 587

Notes
The Total Ambient parameter is not supported on the MVE-8000A.
• When Preset is selected
Knob
1
2
3
5
a) Setting is available when nonlinear effect page turn, roll, cylinder, or sphere is selected.
b) You can make the Lighting effect more effective by adjusting [Total Ambient] to lower the
brightness of the entire image. This setting is used both by this effect and by the
Spotlighting effect.
Notes
The Total Ambient parameter is not supported on the MVE-8000A.
Setting the bar shape of the highlight area
When you select [Bar] or [Preset] in step 3 of "Applying the Lighting effect"
(page 586), use the following procedure to set the shape of the bar.
1
Turn [Light Modify] on.
2
Adjust the following parameters.
Knob
1
Parameter Adjustment
Light Intensity of light in highlight area 0.00 to 100.00
Ambient Intensity of light in ambient area 0.00 to 100.00
Shade Intensity of light in shade area
Total Ambient Brightness of whole image
Shade area
Highlight area
The three regions for which the light intensity can be set
Parameter Adjustment
X X-value of bar center point
Setting values
a)
0.00 to 100.00
b)
0.00 to 100.00
Ambient area
Setting values
a) b)
–8.00 to +8.00
c)
–24.00 to +24.00
d)
–32.00 to +32.00
DME Special Effect Operations
587