Command - Sony MVS-8000X System User Manual

3
4
Repeat steps 3 to 6 as required.
Selecting the Mode for Turning Off Keys Upon
Receiving the Editor Command
Selects the mode for turning off keys when an "All Stop" command is received
from the editor.
1
2
1066
Interfacing With External Devices (Device Interface Menu)
Depending on the selection in step 3, use any of the following methods to
make the setting.
• Press directly on the list on the right of the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob Parameter Adjustment
2 Src No AUX bus number
Press [Set].
In the list on the right of the status area, the selected content is reflected in
the specified DME channel.
In the Switcher >Device Interface menu, press [Editor I/F].
The Editor I/F menu appears.
Select one of the following modes.
All: When an "All Stop" command is received, all keys for the selected
regions are turned off.
Specified: When an "All Stop" command is received, among all the keys
for the selected regions, only the keys specified by the editor are
turned off.
Notes
When an "All Stop" command is received in the process of a transition, the
keys selected for the next transition are also turned off.
Setting values
0 to 48