Wipe Action On Images With Side Flags - Sony MVS-8000X System User Manual

Multi format switcher system

Hide thumbs Also See for MVS-8000X System:

Table of Contents

Wipe Action on Images With Side Flags

When a wipe is carried out on an image with side flags, all wipe patterns can

The following illustration shows the action in a wipe.

Wipe from a 4:3 image to a 16:9 image

Side flag areas

4:3 image (Side flags on)

In the M/E-1 bank cross-point control block, hold down the [UTIL] button,

and in the background A row select the signal (utility bus 1 signal) you

want to insert in the side flag areas.

In the background B row, press the cross-point button corresponding to the

4:3 video material.

At this point, if auto side flags are on, this automatically adds side flags to

the 4:3 video material. (See "Settings for Switcher Configuration (Config

Menu)" in Chapter 20 (Volume 3).)

Use either of the following methods to turn the side flags on.

• Use the Misc >Enable >Side Flags menu. (See page 392)

• Use a cross-point button operation. (See previous item.)

This adds side flags to the 4:3 video material.