Sony MVS-8000X System User Manual page 734

Notes
• It is not possible to undo a master timeline save.
• Saving the master timeline does not carry out a save of effects. Save the
effects for each region first, then carry out the master timeline save.
Changing a master timeline
You can change information already saved in a master timeline.
As an example, to change the M/E-1 register from Effect 5 to Effect 10, use the
following procedure.
Information in master timeline register 1 before change
Region
M/E-1
P/P
Information in master timeline register 1 after change
Region
M/E-1
P/P
1
2
3
4
5
6
734
Creating and Saving a Master Timeline
Register
Effect 5
Effect 5
m
Register
Effect 10
Effect 5
Recall the master timeline register you want to change. (See .)
This simultaneously recalls M/E-1 register 5 and P/P register 5, and the
[M/E-1] and [P/P] region selection buttons light.
Press the region selection button [MASTR], turning it off.
Turn on only the button for the region you want to change (here, [M/E-1]),
and recall the desired register (here, Effect 10).
This recalls M/E-1 register 10, while on P/P register 5 remains selected.
Press the buttons for the regions you want to save on the master timeline
(here, [M/E-1] and [P/P]), turning them on.
Press the region selection button [MASTR], turning it on.
The display shows the register number last used for master timeline
operation.
Press the [STORE] button, turning it on.