Safe Title Settings - Sony MVS-8000X System User Manual

"Installation and Device Setup (Install/Unit Config Menu)" in Chapter 18
(Volume 3).
Enabling or disabling control from the editing keyboard
1
2
To enable control of the preview bus only
When control from the editing keyboard is disabled (when [Editor Enable] is
set to Disable), to enable control of the preview bus only, press [PVW Bus
Enable] in the <Control From Plug-In Editor> group.

Safe Title Settings

Switching the safe title function on or off
1
2
360
Misc Menu Operations
In the menu control block, press the top menu selection button [MISC],
then select VF1 'Enable' and HF2 'Plug-In Editor.'
The Misc >Enable >Plug-In Editor menu appears.
In the <Control From Plug-In Editor> group, press [Editor Enable].
Each time you press the button toggles between enable and disable.
In the menu control block, press the top menu selection button [MISC] and
select VF2 'Safe Title.'
The Misc >Safe Title menu appears.
Using any of the following methods, select the signal to which the settings
apply.
• Directly press the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob to make the setting.
Knob Parameter Adjustment
1 Output Signal to which the settings
apply
Notes
• It is not possible to change the setting for the output for which the safe
title is set off in a Setup menu.
• The safe title function cannot be used for output signals for which
through mode is set to Enable in a Setup menu.
Setting values
1 to 48