Multi Program 2; Overview; Using The Software - Sony MVS-8000X System User Manual

Multi format switcher system

Hide thumbs Also See for MVS-8000X System:

Table of Contents

Multi Program 2

What is Multi Program 2?

By operating the switcher in Multi Program 2 mode, a single switcher mix/

effects bank can be used to create two separate video outputs, referred to as

"main" and "sub." You can set backgrounds, keys, and transitions for each of

main and sub. Keys 2 to 8, however, are common to main and sub.

To enable this function requires the BZS-8200X Multi Program 2 software.

To use the Multi Program 2 software, you are required to enter an install key

which validates the software. (If the software has been factory installed, the

install key is not required.)

For the method of obtaining an install key, contact your Sony representative.

To obtain a key, you may be required to submit the unique device ID of the

switcher you are using. You can check the unique device ID in the Install menu

of the switcher.

For details of the operation, see "Installation and Device Setup (Install/Unit

Config Menu)" in Chapter 18 (Volume 3).

Assigning main and/or sub to switcher banks

For Multi Program 2 operations, a single switcher bank may be shared, and

switched between main and sub, or two separate switcher banks may be used,

each dedicated to main or sub.

Multi Program 2