Setting Transition Control Block Button Assignments - Sony MVS-8000X System User Manual

2
If you do not want to assign any region selection button to the [ALL]
button, press the corresponding button indication, setting it to Off.
The button you pressed returns to normal display.
Notes
Assignment to the [ALL] button is region by region. Changing the assignment
of a region selection button does not change the regions assigned to the [ALL]
button.

Setting Transition Control Block Button Assignments

There are three separate menus for these settings, for the left part of the
transition control block (Transition Module1), upper right part (Transition
Module2), and lower right part (Transition Module3).
The following example describes the operation for the left part (Transition
Module1 menu), but operations in the Transition Module2 and Transition
Module3 menus are similar.
1
In the Panel >Config menu, press [Link/Program Button].
The Link/Program Button menu appears.
2
Press [Transition Module1].
The Transition Module1 menu appears.
3
Select the bank of the transition control block you want to set in the <Bank
Select> group.
The current assignment of the buttons appears at the left.
4
Press the transition type selection button for which you want to change the
assignment.
The button you pressed appears in reverse video.
5
Using any of the following methods, select the function to be assigned,
from the list on the right.
• Press directly on the list.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Overall Control Panel Settings (Config Menu)
953